This will take you to the QPST Software Download menu.Moving on, go to the Start Clients section and select Software Download from the drop-down menu.If you find any of these missing, then re-verify the driver installation. This signifies that the connection is successfully established.Once it launches, go to its Port menu and you should see the COM under Port, device model number under Phone, and the Enabled Status.You should see the QPSTConfig file, double click to open it.Now head over to its installation directory, the default is:.Then download and install the QPST Tool on your PC.To begin with, connect your device to the PC via USB cable.You may now proceed with the steps to flash the firmware via the QPST Flash Tool. Finally, download the latest version of the QPST Flash Tool: Qualcomm Product Support Tool.This would be the BOOT_LOADER.HEX file, present inside the firmware that you had just downloaded. Likewise, make sure to get hold of your device’s boot file as well. Download the firmware corresponding to your device in the HEX format.Furthermore, you will also need to install the Qualcomm USB Drivers on your PC.So it is recommended to take a complete device backup beforehand. Next up, this process will wipe off all the data on your device.If your device has another processor, then you should not try the below instructions.

First and foremost, this guide is only for devices with Qualcomm processor as the underlying chipset.

With that said, let’s now begin with the guide to flash the firmware via the QPST Flash Tool.

All in all, it is a one-stop tool to meet all your device’s flashing needs. Then the fact that it allows you to directly load the stock firmware of your device proves to be the icing on the cake. Likewise, you could also save the Programming Data through it.

Install qualcomm qpst tool